-
-
• Medium: Air • Working temperature:-5~60 ℃ Reset mode: automatic reset Nozzle caliber: 1/8 • Path: 5mm • Use pressure: 0 ~ 1.5MPa • Material: zinc alloy, stainless steel, brass Installation method: install on the valve plate with screws • Installation location: arbitrary
• Medium: Air • Working temperature:-5~60 ℃ • Reset mode: manual reset Nozzle caliber: 1/8 • Path: 5mm • Use pressure: 0 ~ 1.5MPa • Material: zinc alloy, stainless steel, brass Installation method: install on the valve plate with screws • Installation location: arbitrary
• Medium: Air • Working temperature:-5~60 ℃ • Reset mode: manual reset Nozzle caliber: 1/8 • Path: 5mm • Use pressure: 0 ~ 1.5MPa • Material: zinc alloy, stainless steel, brass • Installation method: install on the valve plate with screws • Installation location: arbitrary
• Medium: Air • Working temperature:-20~70 ℃ Reaction time: 0.1 seconds • Maximum action frequency: 3~5 times per second • Lubrication: Not required • Use pressure: 0 ~ 0.8Mpa • Body material: stainless steel
Office address: Room 107-1, Building 4, Kexin Building, Shounan Street, Yinzhou District, Ningbo City
Factory address: No. 22 Xingjia Road, Da'ao Industrial Park, Xikou Town, Fenghua District, Ningbo City
Contact: Mr. Liao
Address: No.22 Xingjia Road, Daao Industrial Zone, Xikou Town, Fenghua District, Ningbo.
Contact: Mr. Liao
Tel: +86-574-88880153
Fax: +86-574-87379458
E-mail: sandy@pneupid.com
Copyright©2023 Zhejiang Pneupid Technology Co., Ltd. All rights reserved. Powered by www.300.cn SEO License
-
