产品展示

PRODUCTS

Home

Product Series

S2

Item No.：

S2-001

分类：

Control elements

分类：

Fluid valve

分类：

S2 Series

概要

宁波纽帕得机械有限公司成立于2009年，是一家专业生产、出口气动元件十余年的高新技术企业。

TEL：0574-87379458
E-mail：sandy@pneupid.com

关键词：控制元件

Message

PDF -Download

Description
Parameter
Installation & Use
Order Code
Functional Symbols

- Commodity name: S2
- Commodity ID: S2-001
• Media: air, water, oil
• Action mode: Direct acting
• Type: normally closed type
• Flow aperture: 16mm
CV value: 4.8
• Diameter of takeover: 1/2
• Use fluid viscosity: below 20 CST (Below)
• Operating pressure: Air, water, oil 0.05-0.7MPa
Maximum pressure resistance: 1.0MPa
• Working temperature range: -5~80 ℃
• Voltage range: ± 10%
• Protection level: IP65
Body material: W2: brass S2: stainless steel
Oil seal material: Nitrile rubber, EPDM rubber, Fluororubber, Silicone rubber
1、 Installation method
Before installing the solenoid valve, it is necessary to check whether the model and specifications of the solenoid valve meet the requirements.
Before installing the solenoid valve, check whether there are impurities or damage at the connection port between the valve body and the pipeline. If there are, clean or replace them in a timely manner.
3. The solenoid valve should be installed in a dry and ventilated place, avoiding direct sunlight.
Before installing the solenoid valve, check if the power supply meets the requirements to ensure that the voltage and frequency of the power supply match the requirements on the solenoid valve label.
5. Before installation, please check the parameters on the solenoid valve label to see if they meet the current operating conditions, such as actual voltage, pressure, medium temperature, etc
6: The optimal installation method for solenoid valves is to have the coil facing upwards, maintain a vertical position, and the valve body in a balanced position;
2、 Use
Before using the solenoid valve, check whether the power supply is normal and whether the solenoid valve is powered on.
During use, attention should be paid to the opening and closing speed of the valve to ensure smooth operation.
Before using the solenoid valve, it is necessary to check whether the temperature and pressure of the medium meet the rated parameters of the solenoid valve to avoid exceeding its bearing range.
Before using the solenoid valve, the valve and valve body should be checked for impurities or damage. If there are, they should be cleaned or replaced in a timely manner.

详细介绍

纽帕得拥有一支强大的研发部门产品全部通过研发，更新，解决客人难题等孵化出，控制元件（不锈钢电磁阀，不锈钢高压电磁阀，不锈钢防爆电磁阀，铝合金电磁阀，铝合金防爆阀，直动式电磁阀，冗余式电磁阀)等等；气源处理元件（全铝合金系列气源件，全不锈钢气源处理元件，高压气源处理元件）等等；附件（定位器，放大器，快排阀，调速阀，接头，气管）等等；通过对客人的需求新增限位开关项目和定位器项目，做出纽帕得响亮名片。

气缸广泛应用于各类机械中。NPPC设计制造气缸已有10多年的历史，拥有强大的技术和销售支持团队，为客户提供完善的服务。

气源处理件是压缩空气质量的保证。它由过滤器、调压阀和油雾器组成。过滤器用于过滤空气源中的水分和污物，调压阀用于调节气源压力，油雾器用于润滑。

• Media: air, water, oil
• Action mode: Direct acting
• Type: normally closed type
• Flow aperture: 16mm
CV value: 4.8
• Diameter of takeover: 1/2
• Use fluid viscosity: below 20 CST (Below)
• Operating pressure: Air, water, oil 0.05-0.7MPa
Maximum pressure resistance: 1.0MPa
• Working temperature range: -5~80 ℃
• Voltage range: ± 10%
• Protection level: IP65
Body material: W2: brass S2: stainless steel
Oil seal material: Nitrile rubber, EPDM rubber, Fluororubber, Silicone rubber

在线留言

感谢您对我们的关注，您有任何建议或意见请给我们留言

Online Message

Thank you for your attention to us. Please leave us a message if you have any suggestions or comments.

Office address: Room 107-1, Building 4, Kexin Building, Shounan Street, Yinzhou District, Ningbo City

Factory address: No. 22 Xingjia Road, Da'ao Industrial Park, Xikou Town, Fenghua District, Ningbo City

Contact: Mr. Liao

Tel: +86-574-87379458

Fax: +86-574-87379458

Email: sandy@pneupid.com

Address: No.22 Xingjia Road, Daao Industrial Zone, Xikou Town, Fenghua District, Ningbo.
Contact: Mr. Liao
Tel: +86-574-88880153
Fax: +86-574-87379458
E-mail: sandy@pneupid.com