-
-
产品展示
PRODUCTS
Product Series
SSM series
Item No.：
A-FA001
概要
• Body Material: Stainless Steel 316L • Appearance treatment: electrolytic polishing • Seal: NBR "O" ring NBR Media contact material: stainless steel 316, nitrile rubber Body function and CV value: 5/2 and 3/2 NC,CV = 1.4(25mm) • Air supply interface: G1/4 "or NPT1/4 • Installation standard: 24 * 32 plate joint • Fastening screw: M5 * 40 Stainless steel • Protection class: IP66 • Explosion-proof grade: Ex db IIB T6Gb/Ex db IIC T6Gb/Ex tb IIIC T80℃ Db • Operating temperature:-20°C~+70°C /-40°C~+55°C /-60°C~+100°C • Working pressure: 0.2 to 0.8 MPa • Working medium: filtered (≤ 40um) dry and lubricated air or neutral gas • Working life: more than 10 million times (normal working conditions)宁波纽帕得机械有限公司成立于2009年，是一家专业生产、出口气动元件十余年的高新技术企业。
- Description
- Parameter
- Installation & Use
- Order Code
- Functional Symbols
-
- Commodity name: SSM series
- Commodity ID: A-FA001
• Body Material: Stainless Steel 316L • Appearance treatment: electrolytic polishing • Seal: NBR "O" ring NBR Media contact material: stainless steel 316, nitrile rubber Body function and CV value: 5/2 and 3/2 NC,CV = 1.4(25mm) • Air supply interface: G1/4 "or NPT1/4 • Installation standard: 24 * 32 plate joint • Fastening screw: M5 * 40 Stainless steel • Protection class: IP66 • Explosion-proof grade: Ex db IIB T6Gb/Ex db IIC T6Gb/Ex tb IIIC T80℃ Db • Operating temperature:-20°C~+70°C /-40°C~+55°C /-60°C~+100°C • Working pressure: 0.2 to 0.8 MPa • Working medium: filtered (≤ 40um) dry and lubricated air or neutral gas • Working life: more than 10 million times (normal working conditions)
1.According to NAMUR international standards, it can directly control single-acting and double-acting pneumatic actuators, and is equipped with a safe and reliable manual device. It is a true multifunctional solenoid valve. Due to its unique gas path structure, all breathing holes on the SSM562 solenoid valve body are connected with the exhaust hole, and the surface of the valve body is not connected with the atmosphere, which can effectively prevent the outside liquid, dust and impurities from entering the valve body, especially suitable for use in outdoor or dust-polluted working environment.
2.According to NAMUR international standards, it can directly control single-acting and double-acting pneumatic actuators, and is equipped with a safe and reliable manual device. It is a true multifunctional solenoid valve. Due to its unique gas path structure, all breathing holes on the CMC562 solenoid valve body are connected to the exhaust hole, and the surface of the valve body has no breathing holes connected to the atmosphere, which can effectively prevent external liquids, dust and impurities from entering the valve body. It is especially suitable for use outdoors or in a working environment with serious dust pollution.
-
-
1. Please check whether the product is in good condition before use, and contact the manufacturer or after-sales service department in time if you find any problems
2. The equipment must be installed and debugged by qualified professionals.
3. Before installation, confirm that the circuit and gas circuit are connected normally, and carefully check whether all connections are tightened to avoid air leakage or short circuit.
4. During installation and maintenance, be sure to turn off the supply gas source, and control the pressure relief by manual switch to remove the residual gas;
5. Before installation, please make sure that the working environment is suitable for the installation of this solenoid valve. Please refer to the main parameters above for confirmation.
6. Before operating, make sure you have properly connected all the wires to the terminal blocks. In addition, we strongly recommend that you trace and review the gas circuits and other accessories to avoid unnecessary failures or damage.
8. In the process of installation and maintenance, the relevant technical standards and specifications stipulated by the state and the site shall be observed.
9. The selection of the cable entry device must meet the requirements of GB/T3836.15-2017, and the installation of the cable entry device should be equipped with the explosion-proof cable entry device that has obtained the corresponding CCC certificate or explosion-proof certificate.
10. Before connecting the power cable, please confirm the correctness of the connection (do not need to distinguish between the positive and negative poles, pay special attention to the distinction between the power cord and the ground wire), and make sure that all screws have been tightened.
-
-
详细介绍
纽帕得拥有一支强大的研发部门产品全部通过研发，更新，解决客人难题等孵化出，控制元件（不锈钢电磁阀，不锈钢高压电磁阀，不锈钢防爆电磁阀，铝合金电磁阀，铝合金防爆阀，直动式电磁阀，冗余式电磁阀)等等；气源处理元件（全铝合金系列气源件，全不锈钢气源处理元件，高压气源处理元件）等等；附件（定位器，放大器，快排阀，调速阀，接头，气管）等等；通过对客人的需求新增限位开关项目和定位器项目，做出纽帕得响亮名片。
气缸广泛应用于各类机械中。NPPC设计制造气缸已有10多年的历史，拥有强大的技术和销售支持团队，为客户提供完善的服务。气源处理件是压缩空气质量的保证。它由过滤器、调压阀和油雾器组成。过滤器用于过滤空气源中的水分和污物，调压阀用于调节气源压力，油雾器用于润滑。
1.According to NAMUR international standards, it can directly control single-acting and double-acting pneumatic actuators, and is equipped with a safe and reliable manual device. It is a true multifunctional solenoid valve. Due to its unique gas path structure, all breathing holes on the SSM562 solenoid valve body are connected with the exhaust hole, and the surface of the valve body is not connected with the atmosphere, which can effectively prevent the outside liquid, dust and impurities from entering the valve body, especially suitable for use in outdoor or dust-polluted working environment.
2.According to NAMUR international standards, it can directly control single-acting and double-acting pneumatic actuators, and is equipped with a safe and reliable manual device. It is a true multifunctional solenoid valve. Due to its unique gas path structure, all breathing holes on the CMC562 solenoid valve body are connected to the exhaust hole, and the surface of the valve body has no breathing holes connected to the atmosphere, which can effectively prevent external liquids, dust and impurities from entering the valve body. It is especially suitable for use outdoors or in a working environment with serious dust pollution.
Related downloads
在线留言
感谢您对我们的关注，您有任何建议或意见请给我们留言
Online Message
Thank you for your attention to us. Please leave us a message if you have any suggestions or comments.
Office address: Room 107-1, Building 4, Kexin Building, Shounan Street, Yinzhou District, Ningbo City
Factory address: No. 22 Xingjia Road, Da'ao Industrial Park, Xikou Town, Fenghua District, Ningbo City
Contact: Mr. Liao
Address: No.22 Xingjia Road, Daao Industrial Zone, Xikou Town, Fenghua District, Ningbo.
Contact: Mr. Liao
Tel: +86-574-88880153
Fax: +86-574-87379458
E-mail: sandy@pneupid.com
Copyright©2023 Zhejiang Pneupid Technology Co., Ltd. All rights reserved. Powered by www.300.cn SEO License
-
