-
-
Specification Body Material：extruded Aluminum Finishing：Anodized Seal：HNBR or NBR Material in contact with fluid：Aluminum , forces Nylon.NBR Function and CV value：25mm / 5/2 and 3/2 NC,CV=1.4（25mm） Port size：G1/4” or NPT1/4 Mount standard：24*32 pipe connection Protection class：IP66 Ex-proof class：Ex ia Ⅱ C T6 Ga; Ex ia IIIC T200 130℃ Da Working temperature：-20~+70℃ /-40~+55℃ Working pressure：0.15~0.8 MPa Working medium：( ≤40um)dry and lubricated air Capacity：0.4~1.2 optional Life cycles：more than 10，000，000times（normal working conditions)
• Body Material: Cold Extruded Aluminum Alloy • Appearance treatment: anodized or electroless nickel plating • Seal: NBR "O" ring NBR • Media contact material: aluminum, reinforced nylon, nitrile rubber Body function and CV value: 5/2 and 3/2 NC,CV = 1.4(25mm) • Air supply interface: G1/4 "BSPP or NPT1/4 • Installation standard: 24 * 32NAMUR plate joint or pipe joint universal • Fastening screw: Stainless steel/M5 * 40 • Protection class: IP65/NEMA4,4X • Explosion-proof grade: none • Operating temperature:-10°C ~ 80°C • Working pressure: 1 to 8 bar • Working medium: filtered (< = 40um) dry and lubricated air or neutral gas • Working life: more than 10 million times (normal working conditions)
• Body Material: Cold Extruded Aluminum Alloy • Appearance treatment: anodized or electroless nickel plating • Seal: NBR "O" ring NBR • Media contact material: aluminum, reinforced nylon, nitrile rubber Body function and CV value: 5/2 NC,CV = 1.4(25mm) • Air supply interface: 1/4 3/8 1/2 • Installation standard: 24 * 32 pipe joint • Fastening screw: M5 * 40 Stainless steel • Protection class: IP66 • Explosion-proof grade: Ex db IIB T6Gb/Ex db IIC T6Gb/Ex tb IIIC T80℃ Db • Operating temperature:-20°C ~+ 70°C/-40℃~+55℃ • Working pressure: 0.15 to 0.8 MPa • Working medium: filtered (≤ 40um) dry and lubricated air or neutral gas • Working life: more than 10 million times (normal working conditions)
• Medium: Air • Working temperature:-5~60 ℃ Reset mode: automatic reset Nozzle caliber: 1/8 • Path: 5mm • Use pressure: 0 ~ 1.5MPa • Material: zinc alloy, stainless steel, brass Installation method: install on the valve plate with screws • Installation location: arbitrary
Office address: Room 107-1, Building 4, Kexin Building, Shounan Street, Yinzhou District, Ningbo City
Factory address: No. 22 Xingjia Road, Da'ao Industrial Park, Xikou Town, Fenghua District, Ningbo City
Contact: Mr. Liao
Address: No.22 Xingjia Road, Daao Industrial Zone, Xikou Town, Fenghua District, Ningbo.
Contact: Mr. Liao
Tel: +86-574-88880153
Fax: +86-574-87379458
E-mail: sandy@pneupid.com
Copyright©2023 Zhejiang Pneupid Technology Co., Ltd. All rights reserved. Powered by www.300.cn SEO License
-
