PRODUCTS


PRODUCTS


+
  • 原图(1).jpg
  • 2(53).jpg

SSW562T6-08

Item No.:

GBF15


概要

● Product material: SS316 ● Appearance treatment: electrolytic polishing ● Action mode: pilot type ● Manual device: with manual device ● Protection grade: IP66 ● Insulation class: H class ● Sealing material: HNBR/VITON/low temperature rubber ● Interface size: 1/4" ● Explosion-proof coil: Ex db Ⅱ C T6 Gb ● Working pressure: 0.15 ~ 0.8MPa ●Working temperature:-10~70 ℃/ -40~55 ℃ ● Valve body function: 2/5 Applicable voltage: 220VAC 24VDC ● Model: SSW561T6-08,SSW562T6-08

Pneupid has a strong research and development department. All products have been hatched through research and development, updating and solving guest problems.

  • Description
  • Parameter
  • Installation & Use
  • Order Code
  • Functional Symbols
    • Commodity name: SSW562T6-08
    • Commodity ID: GBF15

    ● Product material: SS316 ● Appearance treatment: electrolytic polishing ● Action mode: pilot type ● Manual device: with manual device ● Protection grade: IP66 ● Insulation class: H class ● Sealing material: HNBR/VITON/low temperature rubber ● Interface size: 1/4" ● Explosion-proof coil: Ex db Ⅱ C T6 Gb ● Working pressure: 0.15 ~ 0.8MPa ●Working temperature:-10~70 ℃/ -40~55 ℃ ● Valve body function: 2/5 Applicable voltage: 220VAC 24VDC ● Model: SSW561T6-08,SSW562T6-08

    Product Introduction

    1. Pilot structure;
    2. Valve body stainless steel SS316;
    3. Sliding column structure, good pressure holding, high service life;
    4. Adopt low power consumption settings;
    5. Low temperature application settings;
    6. With manual device, easy to install and debug;
    7. The coil is made of stainless steel H grade insulation material;
    8. Fully enclosed flameproof structure;
    9. Widely used in petrochemical, shipbuilding, textile, paper and other industries.







     

Detail


Pneupid has a strong research and development department. All products have been hatched through research and development, updating and solving guest problems. Control components (stainless steel solenoid valve, stainless steel high pressure solenoid valve, stainless steel explosion-proof solenoid valve, aluminum alloy solenoid valve, aluminum alloy explosion-proof valve, direct acting solenoid valve, redundant solenoid valve), etc.; Air source treatment components (all aluminum alloy series air source parts, all stainless steel air source treatment components, high pressure air source treatment components), etc. Accessories, etc. Accessories (positioner, amplifier, quick discharge valve, speed regulating valve, joint, air pipe), etc. By adding limit switch items and positioner items to the needs of guests, Pneupid's loud business card is made.

Product Introduction

1. Pilot structure;
2. Valve body stainless steel SS316;
3. Sliding column structure, good pressure holding, high service life;
4. Adopt low power consumption settings;
5. Low temperature application settings;
6. With manual device, easy to install and debug;
7. The coil is made of stainless steel H grade insulation material;
8. Fully enclosed flameproof structure;
9. Widely used in petrochemical, shipbuilding, textile, paper and other industries.







 

Online Message


Thank you for your attention to us. Please leave us a message if you have any suggestions or comments.

Customer Message

Thank you for your attention to us. Please leave us a message if you have any suggestions or comments.

Submission