PRODUCTS


PRODUCTS


+
  • 1(1698228042978).jpg
  • 2(1698228043052).jpg

PA10S stainless steel series angle seat valve

Item No.:

JZF-002


概要

● Product material: two kinds of material tin bronze and stainless steel ● Pneumatic form: single/double acting ● Long service life, large flow, small flow resistance without water hammer, exquisite workmanship Applicable medium: oil, water, alcohol, organic solvent ● Control medium: air/neutral gas ● Sealing material: PTFE ● Interface size: 3/8 "1/2" 3/4 "1" 2" ●Ambient temperature:-10~60 ℃ ● Working pressure: 0 ~ 16Bar ● Model: PA10P025F27NC,PA10S025F27NC....... (If you need other models of this series of products, please contact NPPC salesman)

Pneupid has a strong research and development department. All products have been hatched through research and development, updating and solving guest problems.

  • Description
  • Parameter
  • Installation & Use
  • Order Code
  • Functional Symbols
    • Commodity name: PA10S stainless steel series angle seat valve
    • Commodity ID: JZF-002

    ● Product material: two kinds of material tin bronze and stainless steel ● Pneumatic form: single/double acting ● Long service life, large flow, small flow resistance without water hammer, exquisite workmanship Applicable medium: oil, water, alcohol, organic solvent ● Control medium: air/neutral gas ● Sealing material: PTFE ● Interface size: 3/8 "1/2" 3/4 "1" 2" ●Ambient temperature:-10~60 ℃ ● Working pressure: 0 ~ 16Bar ● Model: PA10P025F27NC,PA10S025F27NC....... (If you need other models of this series of products, please contact NPPC salesman)

    Characteristics when flow direction A is selected:
    1. When selecting the flow direction, the service life of the product can be improved.
    2. When the working medium is liquid, select the flow direction to prevent water hammer impact.
    3. For products with diameter φ 15/φ 20/φ 25, the working pressure must be below 0.3MPa, otherwise double-acting actuator must be selected.
    4. For products with diameter Φ32 /Φ40, double-acting Φ size shall be selected for the actuator.
    5. For products with a diameter of Φ50, the actuator must select a double-acting Φ125 size.
    Characteristics when selecting the flow direction B:
    When the work is steam or gas, when the flow direction is selected, the fluid sealing of the product can be improved, but because the V-shaped sealing ring in the valve body is in contact with the working medium for a long time,
    This has a certain impact on the service life of the product. In addition, the working medium is liquid.
    The body is resistant to water hammer impact.








Detail


Pneupid has a strong research and development department. All products have been hatched through research and development, updating and solving guest problems. Control components (stainless steel solenoid valve, stainless steel high pressure solenoid valve, stainless steel explosion-proof solenoid valve, aluminum alloy solenoid valve, aluminum alloy explosion-proof valve, direct acting solenoid valve, redundant solenoid valve), etc.; Air source treatment components (all aluminum alloy series air source parts, all stainless steel air source treatment components, high pressure air source treatment components), etc. Accessories, etc. Accessories (positioner, amplifier, quick discharge valve, speed regulating valve, joint, air pipe), etc. By adding limit switch items and positioner items to the needs of guests, Pneupid's loud business card is made.

Characteristics when flow direction A is selected:
1. When selecting the flow direction, the service life of the product can be improved.
2. When the working medium is liquid, select the flow direction to prevent water hammer impact.
3. For products with diameter φ 15/φ 20/φ 25, the working pressure must be below 0.3MPa, otherwise double-acting actuator must be selected.
4. For products with diameter Φ32 /Φ40, double-acting Φ size shall be selected for the actuator.
5. For products with a diameter of Φ50, the actuator must select a double-acting Φ125 size.
Characteristics when selecting the flow direction B:
When the work is steam or gas, when the flow direction is selected, the fluid sealing of the product can be improved, but because the V-shaped sealing ring in the valve body is in contact with the working medium for a long time,
This has a certain impact on the service life of the product. In addition, the working medium is liquid.
The body is resistant to water hammer impact.








Online Message


Thank you for your attention to us. Please leave us a message if you have any suggestions or comments.

Customer Message

Thank you for your attention to us. Please leave us a message if you have any suggestions or comments.

Submission